Tag Archives: featured

Painting Blog (I’m in White Dwarf!)

Wooo!

This is a picture of my Word Bearers Terminators published in this week’s White Dwarf!

wd

Here is a clearer picture of the minis in question!

terminators

I am pretty damn happy about this, and pretty shocked too! 😀

Discuss this post here.

Share Button

Painting Guide: Bases

The following article is a simple guide to basing your miniatures. There are several ways you can base miniatures, this is just the method I prefer and if you have any other ideas you should share them with us!

The level difficulty of this guide is simple, and can be achieved by any one!

What you will need before starting:

– The miniature’s base.

bases1

 

– PVA Glue

pvaglue
– Basing sand

basessand
– A Medium Drybrush

mediumdrybrush
– A glue brush (preferably an old brush from your collection you don’t mind getting damaged)

gluebrush
– Black undercoat

basesspray

– Skag Brown

skagbrown

 

 

 

 

 

 

– Tau Light Ochre

taulight

 

 

 

 

 

 

– Ushabti Bone

ushabtibone

 

 

 

 

 

 

Optional tools:

– Static flock
– Snow flock
– Mourn Mountain Snow
– Battlefield debris (i.e. old guns from your bits box, a spare arm or shoulder pad)
– Suitably sized pieces of stone from your garden

 

For the sake of this article I have chosen to paint up a base for my next Chaos Space Marine biker. Normally I would stick a standard infantry model to its base and undercoat both model and base at the same time. However this approach isn’t suitable for bikers as it makes painting the base difficult and can often lead to a messy miniature.

The Possessed Marines in this picture have been based with sand and stuck to their bases before being undercoated.
The Possessed Marines in this picture have been based with sand and stuck to their bases before being undercoated.

Step 1:
Take your base and clear any flash around the edges. This may require a modelling knife but usually Games Workshop’s bases have very little flash.

bases1

 

Step 2:

In order to align your bike to the base without covering the area you wish to glue the bike to, a clever technique is to paint the bottom of the bike with a bright colour like so.

baseguide1

With the paint still wet, you can then place the bike onto the base and get an approximate place you want the bke to be, and the wet paint will mark out the areas you will avoid further on in the process.

baseguide2

 

Step 3:

Once the paint has dried you can apply a suitably large dollop of PVA glue to your base. I recommend you use an old brush to spread the glue about, and keep it handy so you always have for future bases.baseguide3

baseguide4

 

 

Step 4:

With the glue spread out on your base, try to avoid covering the areas marked in blue in the picture (or whichever colour you decided to use) and then dip the whole base in your sand box.

baseguide5

You may want to scrape a few pieces of sand away and have a few attempts of dipping the base into the sand so you get the coverage you are happy with. Once you have got the result that satisfies you, leave the base to dry for thirty minutes or so.

baseguide6

 

Step 5:

Once the base has dried it’s time to undercoat. For this I use normal undercoating spray. There are many producers of black undercoat spray, for the sake of this article I recommend using Citadel Black primer spray, but you can use the one you prefer if you wish. You can also use normal black paint, however this is much more time consuming and you run the risk of brushing away the sand as you apply it.

Remember, spraying should always be done in a well ventilated area, preferably outside when available.

baseguide7

I use an empty black box for my own undercoating needs, however if you are doing a large amount of miniatures you can use a stick, and blue tack the models to it and spin the stick slowly around as you spray. For this article I used my trusty cardboard box!

 

Step 6:

Leave the base for another thirty minutes or so to allow for the base to dry fully. If you try to apply the colours to the base too early you will end up removing the sand.

baseguide8

 

Step 7:

Once the base is dry you can now start the fun bit of painting it.

baseguide9

The first layer will be Skrag brown. You will want a good dollop again of this, and you will want to water it down. The more layers you do the better sealed in the sand will become. You can just do one layer of Skag Brown if you want your base to have a darker appearance, however I like to do two to three depending on the size of the base.

Always let each layer dry before doing another.

The first layer of Skag Brown
The first layer of Skag Brown

Don’t worry at this stage about knocking the odd bit of sand off. Try to be careful but it isn’t the end of the world if small parts of the base lack some sand.

Additionally don’t worry about the rim of the base, you will be coming back to the rim of the base later.

Three layers of Skag Brown later!
Three layers of Skag Brown later!

 

Step 8:
When you are happy with the skag brown coverage, its time to dry brush the base with Tau Sept Ochre.

baseguide12

Simple as that.

 

Step 9:

Dry brush the base again, but this time with Ushabti Bone.

baseguide13

 

 

Step 10:

Finally paint the rim of the base with Skag brown.

baseguide14

And that’s it! Your base is finished ready for your model.

baseguide15

 

 

 

Further ideas!

The above method is a great starting place for your miniatures, but you can always go a few steps further and add other elements to your bases.

A finished bike sits on a base like the one shown in the article.
A finished bike sits on a base like the one shown in the article. This base has had some dead grass added to it, which is done by simple adding some PVA glue to the finished base and had the grass added.

 

This Heldrake's base has had slate stones scattered over it to break up the base a little. These stones are simply super glued to the base just before adding the sand with PVA glue.
This Heldrake’s base has had slate stones scattered over it to break up the base a little. These stones are simply super glued to the base just before adding the sand with PVA glue.

 

wfbsorc1

 

 

 

 

 

 

 

 

Both the Wight King and the Chaos Sorcerer have had snow added to the base. Similar to the dead grass on the Chaos Bike's base, these effects are added after the base has had the basic work done to it.
Both the Wight King and the Chaos Sorcerer have had snow added to the base. Similar to the dead grass on the Chaos Bike’s base, these effects are added after the base has had the basic work done to it.

 

This dreadnought has the head of a battle sister sitting on a rock...
This dreadnought has the remains of an Ultramarine laying before him…

 

...whilst this Daemon prince stands astride the many skulls of the fallen!
…whilst this Daemon prince stands astride the many skulls of the fallen!

Discuss this article here.

 

Share Button

Painting Guide – Chipped Armour

I wanted to share a simple yet effective technique I stumbled across. This is a really good guide to doing chipped armour on tanks (or any armour for that matter) and it is really simple to!

http://thetwelveolympians.co.uk/painting/chipping/

It’s really worth checking out if you have ever wondered how it’s done. Here is a picture from the article to show the effect.

20140510_085519_zps8svrcaz1

I couldn’t get in touch with Joel (AKA Hades) but it’s a great guide and I don’t think he will mind me sharing it.

Share Button

Painting Blog – Heldrake finished

Finally finished this monster!

I can’t say it the best miniature I have ever painted. The raised metal areas are a real pain, and the “feet” of the miniature are ridiculous. They really make the whole model deserve its nickname of “Helturkey”.

But I do like the overall shape and the the theme of the model. Pilot merged with Daemon merged with vehicle. But I think it could have been executed much better in areas. Plus the model is a real paint to glue together.

Anyway, here are some pics! I will be finishing the base later tonight.

hdf1 hdf2 hdf3 hdf4 hdf5 hdf6 hdf7 hdf8 hdf9 hdf10

Share Button

Painting Blog

Heldrake’s head has now been given a lick of paint. I will be touching this up as the last thing to be done. The metal work needs more depth and the eyes need a little more detail added to them. But I am so far happy with it.

hdhead

I decided last night that I wanted to get the body started before I finished the head so that I could just sit and focus on it without wondering how the body would fit into the rest of the paint scheme!

Share Button

1500 points Battle Report – Word Bearers vs Imperial Guard Penal Legion!

I’ve never played against Imperial guard in the current edition of the rules, or the last edition, so it was a game I was looking forward to.

Here are the lists:
Word Bearers

Daemon Prince
Wings
Mark of Tzeentch (incredible mark)
Black Mace
Level two psyker
Sorceror
Level two Psyker
10 CSM
Plasma guns
Fearless stick
2 plasma guns
Champion with power fist
VOTLW

10 CSM
Plasma guns
Fearless stick
2 plasma guns
Champion with power fist
VOTLW

3 Terminators
Chainfist
3 combi meltas

3 Terminators
Chainfist
3 combi meltas

3 Obliterators
Mark of Nurgle

5 havocs
4 missile launchers
Skyfire missiles
Penal Legion:

(Forgive me here, because I don’t know Imperial Guard very well, so I will do my best to represent his force as well as I can).

Command squad – 5 dude fellas.
Command Chimera transport

10 man penal legion squad

10 man penal legion squad

10 man penal legion squad

10 man penal legion squad

10 man penal legion squad

10 man penal legion squad

3 Chimera Transports – With multi meltas

3 Manticore tanks (I cannot believe how fucking good these are)

I think that’s all, I could be wrong, so i will fix his list as I remember it.
Set up

Kingy (my opponent!) Won the roll, so he chose to set up first and go first.

He placed his Three Chimera at the far corners of the table edge on his half, and one in the middle. Nicely spread out for full table coverage.

He then placed His penal legion and tanks infront of him pretty standard set up. Manyof the squads started the game in their vehicles. The ones who didn’t set up on each side of the table.


In reply my set up happened with a lot of marines hiding behind walls, or trying to make themselves look less like a target as much as they possibly could.

Most of them hid behind the two bastions just ahead of my deployment zone, or on the flanks in order to try and cut off the squads trying to flank me. My Daemon Prince also stood behind the bastion to prevent Line of sight, and my sorceror joined the 10 man CSM unit on the left flank.

My two units of terminators stayed in reserve, hoping to drop down on any tanks that caused a problem (at this point I had no idea how good Manticore tanks are).

I thought I’d taken more pics of my own set up but clearly not :/

 

Chaos Turn 1

I managed to steal initiative! 😀

So with the Chaos Gods already looking on me with favour, I lept into action. My Havocs and Obliterators moved forward into the bastions, and moved half way up the building. Next turn they will be in great positions to fire at the oncoming lapdogs of the false Emprah!

My Two 10 man sqauds both advanced, with my Sorcerer casting a spell that gave him +D3 Initiative and Attacks, and getting Iron Arm off, givign him +2 STR and T. My Daemon Prince took to the skies, and flew to the centre of the board, flapping away in a swoop in order to make sure he was a difficult target to shoot at.

He tried to cast two psychic powers. The first One he had was Life Leech, he rolled to cast it but rooled doubel 6 and lost awound. His second Psychic power was the Tzeentch spell Chaos Boon. He passed this time, which allowed him to roll ont he chaos boon table. I rolled 32, Bloated, which restored him to his full wounds. So a pointless round of shooting.

 

Guard turn 1

The Imperial Guard wasted no time at all with unleashing their fire-power at the Word Bearers, and his movement phase was pushed through quickly, with only the two squads on the flanks positioning to make sure they had some thing to shoot at.

The Guardsmen tried to shoot the Daemon Prince in the sky, but all the shots missed or failed to wound. Then his Chimaera tanks with Multi Meltas rumbled up to the Bastion the Havocs were sat inside, and reduced it to a pile of molten slag, killing all the marines in the process.

Furthermore, all three Manticore tanks let loose a devastating amount of fire power, cleaning up an entire squad of Marines on the left flank apart from the champion and the Sorcerer accompanying them, and taking out 5 marines on the right flank.

By the end of turn one my casualties looked like this:


Chaos Turn 2

That was horrible.

I don’t mind admitting that after seeing so much of my army destroyed so easily, I was ready to throw the towel in. Still, I am not a sulky guy, I am really into 40k for the spectacle of the game, and nothing looked more awesome than seeing all those marines getting blown to pieces. Plus, I still had my reserves and Obliterators. If I was going to lose, I was going to bring the pain to some of his army.

My second turn started with one squad of my terminators arriving from deep-strike on the left flank, I placed them down right near his Manticore hoping they would Shoot the hell out of it with their meltas. I gambled a little here, and placed them out of 6″ range, purely so they wouldn’t suffer a mishap. They did however hit bang on target, so I had to hope they would be able to get the job done.

Sadly they didn’t, their guns didn’t even scratch the tank, which left them awfully vulnerable to the Chimaera behind them.

My Obliterators who were now at the top of their Bastion, unleashed three lascannon shots at the Manticore in the centre of the table, blowing its main weapon up and essentially making it a Heavy Bolter turret. Hurrah! 😀

The Sorceror and Champion on the left flank attempted to charge the Chimaera tanks, but failed, and the 5 remaining marines on the right flank edged towards the Penal squad on the right flank, letting loose some shots from their weapons, only managing to kill one due to their cover saves.

My Daemon Prince then decided to take matters into his own hands, he crashed down onto the battlefield in front of the Imperial Guard centre line, casting his Psychic powers against a guardsmen, draining his body of all vitality, and absorbing it into himself. He also Cast a boon upon himself, which granted him shrouded. After which he thundered into close combat, his black mace crunching through three of the Guardsmen, and the aura of death it permeated causing the rest of the squad to collapse like flies around him, only two Guardsmen remained of the 10 man squad he had charged.

That’s more like it!
Imperial Guard turn 2

The Imperial Guard responded in the centre of the table by charging more Guardsmen into the combat with the Daemon prince, and turned the Chimaera on the left flank round to deal with the newly arrived terminators. The Guardsmen on the right flank took deeper positions into the cover they were in, and returned fire at the Chaos marines but they failed to wound.

The Chimaera destroyed the terminators. And the Guardsmen managed to kill off the Champion accompanying the Sorcerer on the left flank. The two Matnicores focused on the Obliterators but they made all of the saves required of them, and failed to kill anything.

At this point in the game, I felt my luck changing. Both Kingy and I had lost a lot of stuff, but I felt he still had the advantage, sicne he had destroyed so much, and I was yet to wipe out anything but the one squad the Daemon Prince took care of. Thankfully, Kor Ghalbron did Lorgar proud yet again, cutting swathes out of the Guardsmen, and the Black Mace adding more and more casualties to the list.

This left me feeling great as my third turn began!
Chaos Turn 3

My Daemon prince and Sorcerer started by casting their powers on themselves, the sorcerer gaining 3 attacks and 3 initiative and also +2 strength and toughness. The Prince gained plus one strength and carried on pulping guardsmen into mush. The Terminators arrived from reserve and landed on the right flank, blowing the crap out of the Manticore (that’s more like it!).

The Sorcerer Charged into the back of the two Chimaera, and focusing all his might into his force sword, crushed both tanks in a frankly dazzling display of destruction. The Havoc squad had not died in vain!

The Obliterators focused on the Squad of Guardsmen near the sorcerer managing to take out two Guardsmen who decided to go to ground and managed to avoid getting completely melted down into a pool of goo.

The Close Combat between the Daemon Prince and the Last of the penal legion in the centre of the board ended with the prince wiping them all out apart from the two sergeants and one lowly legionnaire.


Imperial Guard Turn Three

Kingy Pulled his Command squad out of the tank in order to try and take out the sorceror which he duly did.

His Two remaining manticore failed to touch the Obliterators, however his Guardsmen on the right flank managed to kill three of the Chaos Space Marines, who thankfully passed their morale check.

In the combat phase, the Daemon Prince finished off the last three penal legion guardsmen and set his sights on the command squad that had just killed off the Sorcerer.

The turns were much shorter now both of us had taken some casualties, however the game was still pretty tense, and the Victory points were pretty even as I went into turn four!

 

Chaos Turn Four

Well, the game was soonto end, but before it did, I still needed to claw some victory points back. On my right flank my terminators charged into the Guardsmen who were in cover. They lost one of their number to overwatch. The Daemon Prince Stormed into the Command Squad, and the Obliterators managed to Stun the Command tank.

In combat the Daemon prince Killed off the command squad, stomped all over their remains for daring to look upon him and live. The Terminator champion issued a challenge to the Sergeant of the Guard squad, who not onyl butchered him, but was granted Daemonhood for his long service to the Dark Gods! (My great Unclean one making an excellent model for it!).

These two then made their way to the Imperial Guard Deployment area for the Linebreaker victory point.
Guard Turn four

Nothing of note happened in the Guard turn, the Guardsmen on the left flank tried and failed to shoot the Daemon Prince, and the Manticore fired its last missile off but it failed to scratch the Obliterators.

 

Chaos Turn Five

My last turn had arrived, and I was quite keen on making it count. Sadly the dark Gods disagreed with me, and for some reason chose to turn my Daemon Prince into a Chaos Spawn as he beseeched them for further power using the psychic ability Chaos Boon. This was funny as hell, but left me cursing my greed!

The Oblits fired away at the tanks but failed to do much, and the Terminator and the Newly arrived Daemon prince on the right flank just sauntered a bit to make sure they got the line breaker points.

 

Imperial Turn 5

Nothing at all happened for Kingy, his shots went wide and we were left to count the points up as the game ended!
Victory points

Chaos: 9
Imperial Guard: 8

 

Conclusion

This was a great game, and I would like to point out how great Kingy’s guard are. They are a great themed force, with the Arbites as the commanders of the army (the police) and the penal legion all in Orange prison jump suits. It was great playing against him, and I am hopefully going to be getting at least one more game in against him before I go back to uni.

The result was a close one, and i really did think he had it in the bag after the destruction of half my army in turn one. It seems that 2+ saves are the way against Imperial Guard of this variety. Sure those Manticores hit hard, but 2+ saves are the way to go to prevent mass destruction. I really want to have two squads of 5 terminators with a Landraider in my army, so when I eventually get some cash I reckon they may be my next purchase.

A last word should go to my Daemon Prince, who, despite being turned into a spawn in the last turn, pretty much won the game for me. That black mace is horrific, and Kingy’s hope to tar pit him with mass guardsmen just didn’t work because of it.

Share Button